RSS RSS Subscribe

Posts tagged: JayEff013

How To Fix ‘Error 1904′ ‘Module (name) Failed To Register’.

By , February 24, 2012 11:46
Hot:

You may have seen this error while installing some software, but the software seems to install ok and works fine. So whats this error all about?

Check out the video I did which tells you all about this error.

Continue reading 'How To Fix ‘Error 1904′ ‘Module (name) Failed To Register’.'»

DiggRedditRead It LaterGoogle ReaderYahoo MailSlashdotWordPressIdenti.caStumbleUponMySpaceLinkedInDeliciousLiveJournalHotmailAsk.com MyStuffBlogger PostBookmark/FavoritesGoogle BookmarksFacebookTwitterOrkutShare

Ubuntu 11.10 – How To Download And Install To A Bootable USB Drive – Video’s

By , February 6, 2012 19:00
Hot:

Yes, I did finally update this. This time two separate video’s to attempt to keep the boredom viewing times to a reasonable limit.

This is being done on a Ubuntu 10.04 machine and the USB drive is a 2GB Kingston. Its older, but more than sufficient for the job.
Part 1:

Part 2:

I hope this helps anyone having issues with this process. If you have any questions feel free to comment.

DiggRedditRead It LaterGoogle ReaderYahoo MailSlashdotWordPressIdenti.caStumbleUponMySpaceLinkedInDeliciousLiveJournalHotmailAsk.com MyStuffBlogger PostBookmark/FavoritesGoogle BookmarksFacebookTwitterOrkutShare

How To Create a Bootable USB Drive with Ubuntu 11.04

comments Comments Off
By , August 21, 2011 11:04
Hot:

Since I made the post for 10.10 here, I decided to update it with the process for 11.04. Honestly it’s not any different.

This is being done on a Ubuntu 10.04 machine and the USB drive is a 2GB Kingston. Its older, but more than sufficient for the job.

I hope this helps anyone having issues with this process. If you have any questions feel free to comment.

DiggRedditRead It LaterGoogle ReaderYahoo MailSlashdotWordPressIdenti.caStumbleUponMySpaceLinkedInDeliciousLiveJournalHotmailAsk.com MyStuffBlogger PostBookmark/FavoritesGoogle BookmarksFacebookTwitterOrkutShare

How To Create a Bootable USB Drive with Ubuntu 10.10

By , May 23, 2011 09:56
Hot:

Well it has been a while but not all is lost.  Most recently i was quite surprised to hear that many people have problems with this.  Since it is pretty simple I figured it was a good opportunity to explain the process.  Sure Natty is out now, but I figure many folks will still find this relevant.  This is being done on a Ubuntu 10.04 machine and the USB drive is a 2GB Kingston. Its older, but more than sufficient for the job.

I hope this helps anyone having issues with this process. If you have any questions feel free to comment.

DiggRedditRead It LaterGoogle ReaderYahoo MailSlashdotWordPressIdenti.caStumbleUponMySpaceLinkedInDeliciousLiveJournalHotmailAsk.com MyStuffBlogger PostBookmark/FavoritesGoogle BookmarksFacebookTwitterOrkutShare

Theme by Themocracy